Adhesive Dispensing Equipment, Robotic, 2 Part Meter Mix
2-Part Foam Gaskets Bonding Golf Clubs
2-Part Foam Gaskets
A Dispensed-Foam-In-Place (DFIP) gasket is normally created by applying a two-part liquid silicone material to create a dispensed-in-place compression gasket in applications that require low sealing force. DFIP gaskets replace many traditional engineered die-cut gaskets.
Bonding Golf Clubs
After selecting a pre-set shot size, the operator of the Servo-Flo 801 system is able to dispense a precise volume of mixed material on command. The system is easily integrated into manual, semi-automatic, or fully-automated production.
Golf Club Manufacturers Click Here
Bonding Kevlar Fabric Battery Manufacturing
Bonding Kevlar Fabric
To protect personnel and contents, the ASV is lined with a layer of Kevlar® fiber. A shot size is selected and the See-Flo® 7 System dispenses a precise volume of 2-part mixed material. The ASV is rotated and the adhesive-coated Kevlar fiber is applied.
Battery Manufacturing
To protect personnel and contents, the ASV is lined with a layer of Kevlar® fiber. A shot size is selected and the See-Flo® 7 System dispenses a precise volume of 2-part mixed material. The ASV is rotated and the adhesive-coated Kevlar fiber is applied.
Vari-Volume Filter End-Cap Molding High Volume Filter End-Cap Molding
Vari Volume Molding
Whether your dispense application requires an operator controlled amount or a preset volume or ‘shot’ of mixed material to fill different sized end caps, the See-Flo 7 provides the tool to accomplish each task.
Filter Manufacturers Click Here
High Volume Molding
Whether your dispense application requires an operator controlled amount or a preset volume or ‘shot’ of mixed material to fill different sized end caps, the Servo-Flo 704 provides the tool to accomplish each task.
Filter Manufacturers Click Here
Reflective Safety Marker Tile to Metal Bonding
Reflective Safety Marker
The marker shell and reflective surface are made from a tough plastic shell. This shell is filled with a two component polyurethane material. The urethane provides body, strength and support for the marker and allows it to be bonded to road surface.
Tile to Metal Bonding
The See-Flo 494meter/mix/dispense system is used to apply a 2-Part structural adhesive for the assembly of large communication antenna. The two component adhesive bonds the antenna tiles to a metal superstructure.
Battery Element Bonding Robotic Dispensing of Appliance Adhesives
Battery Element Bonding
Battery manufacturers bond battery elements into each cell. This automated battery cell application required a preset ‘shot’ of mixed epoxy -in rapid succession, into each of 6 battery cells.
Stiching Applications
2-station and 6-station robot dispensing systems are created for manual load and unload of appliance components.
Tech Papers
Servo Motor Drive Dispensing Systems Selecting Application Process Technologies
Servo Motor Drive Dispensing Systems
Two items critical to dispensing performance and resulting product quality are the metering principle and motor drive selection. The purpose of this guide is to present the purpose of Servo Motor drives used in dispensing adhesives and sealants.
Robotic Dispensing
Manufacturers using adhesives and sealants in their product assembly process must select the right dispensing equipment and the best application technology for applying the selected material for their bonding, sealing, gasketing or potting process in order to meet their targeted efficiency and production cost requirements.
Ensuring Effective Robotic Dispensing Automating Fluid Dispensing Cuts Production Costs
ensuring effective robotic dispensing
Equipment selection choices made at the beginning of a project can directly affect its final quality. The correct robot, metering-dispensing system, controllers and communication interface all play a critical role.
robotic dispensing
Production upgrade opportunities include changing from manual to semi-automatic dispensing or upgrading from semi-automatic to fixtured robotic dispensing.
Meter/Mix Dispense Equipment: Key to Multiple
Connector Assembly
Turn-Key Potting Benefits OEM Electronics Manufacturer
Biwax and Sealant
Biwax and Sealant Equipment team up to satisfy a demand to pot 720 automotive electrical connectors per hour and maintain the customer's high level of quality.
2-K Potting
A 2-Part urethane is used in an integrated potting system to produce 200 fully cured electronic modules per hour.
Precision Dispensing Equipment for a New
Two-Component Silicone Foam Application
Meter/Mix/Dispense System Meets Critical Mix Ratios in Abrasive Urethane Application
gasketing
Dow Corning and Sealant Equipment develop a system for high-production rate gasketing applications of silicone foam for automotive, electronic, appliance and airframe/aerospace industries.
Filter Manufacturer
A filter manufacturer solves the issues of using different polyurethane formulations requiring different mix ratios.
Potting and Encapsulating Electronic Components Selecting the Right 2-Component Dispense Valve Selecting the Right 2-Component Dispense Valve
Potting and Encapsulating Electronic Components
Almost every industry has been revolutionized by electronics - defense, aerospace, automotive, medical, recreational, telecommunications, home appliance, computer. The products manufactured in these areas are by-products of electronic technology.
Ensuring Effective Robotic Dispensing
Factors to consider for selecting a two-component valve in a meter mix dispensing system include the material viscosities, mix ratio (by volume), filler types and contect, how the fillers affect specific gravity or density, the type of material, and the material compatibility with machine components.
   

2 Year Warranty

"When it comes to solving liquid dispensing problems, you won't find a
better resource than Sealant Equipment and Engineering."


Home · Dispense Equipment · Equipment Quote · Dispense Valves · Valve Quote · Request Service · Map & Directions · Site Map · E-Mail Us· Site Credits
Sealant Equipment - Plymouth, MI 734-459-8600