SERVO-FLO^® 605 - VARIABLE RATIO

This variable-ratio, positive rod displacement, 2-Component meter-mix dispense system uses dual independent-drive servo motors to accurately meter materials on ratio. The meter, control panel and operator interface are enclosed. The ratio is adjusted in the operator interface control panel.

The system dispenses shots or beads and the dispense speed can be varied throughout the dispense cycle to provide a variable flow rate. The meter system is designed for low to high viscosity materials, can be fed by pump or tanks and dispenses precision shot volumes or bead profiles.

SERVO-FLO^® 105 - VARIABLE RATIO

This variable-ratio, positive rod displacement, meter-mix dispense system has dual independent-drive servo motors to accurately meter materials on ratio. Ratio is adjusted in the operator interface.

The system dispenses precision volumetric shots or bead profiles. The flow rate can be varied on-ratio during the dispense cycle to accommodate different shot flows, bead diameters and tip speeds.

The meter accepts low to high viscosity materials and can be supply pump fed or pressure tank fed. The meter and control panel are individually floor stand mounted or on a common portable cart.

SERVO-FLO^® 302 - FIXED RATIO

Totally enclosed and designed for automated production, the SERVO-FLO 302 is a Servo-motor powered fixed ratio, positive rod displacement 2-part meter mix dispense system.

This unit can be tank fed or pump fed and is capable of dispensing precise volumes or precision bead profiles.

The dispense rate can be varied throughout the dispensing process to provide varying bead sizes or variable flow. Ideal for low to medium viscosity materials.

SERVO-FLO^® 505 - FIXED RATIO

Meter mix dispense and robotically apply uniform beads of two component structural bonding materials directly to metal and plastic automotive panels (i.e. doors, hoods, decks).

A servo motor with internal reduction drive and positive displacement pistons are interfaced with the robot controller to dispense the specific bead diameter throughout the adhesive pattern.

A light weight SNUF-BAK™ two component dispense valve with disposable NO-FLUSH static mixer nozzle blends the materials at the point of application.

PROGRAM-A-BEAD^® 692 - FIXED RATIO

Meter mix dispense and robotically apply uniform beads of two component structural bonding materials directly to metal and plastic automotive panels (i.e. doors, hoods, decks).

A servo motor drive with external reduction and positive displacement pistons are interfaced with the robot controller to dispense the specific bead diameter throughout the adhesive pattern.

A light weight SNUF-BAK™ two component dispense valve with disposable NO-FLUSH static mixer nozzle blends the materials at the point of application.

SEE-FLO^® 494 - LOW VOLUME

This production proven meter mix dispense system is well suited for applying uniform beads of two component structural bonding adhesives.

AirDraulic driven (air over oil) positive displacement metering rods meter the adhesive in exact proportions and dispense at a preset constant flow rate. Meter systems are either floor or cart mounted.

See-Flo 494 has a volume capacity of 9.4 cu. in. at 1:1 ratio. The meter can be supply pump fed or pressure tank fed. The meter and control panel are on a common floor stand or portable cart.

SERVO-FLO^® 488 - HIGH VOLUME, SERVO DRIVE

This positive rod displacement meter-mix dispense system applies a precise bead or shot of medium to high viscosity materials.  The Servo Motor drive provides precise flow rates and dispense volumes and is either floor or cart mounted.

Servo-Flo 488 has a volume capacity of 85.5 cu. in. at a 1:1 ratio. The meter can be supply pump fed or pressure tank fed. The meter and control panel are on a common floor stand or portable cart and supplied with Snuf-Bak or No-Drip dispense valves.

SEE-FLO^® 488 - HIGH VOLUME, AIR-OIL DRIVE

This positive rod displacement meter-mix dispense system applies a precise bead or shot of medium to high viscosity materials. The AirDraulic™ air-over-oil drive provides consistent flow rates and is either floor or cart mounted.

See-Flo 488 has a volume capacity of 85.5 cu. in. at a 1:1 ratio. The meter can be supply pump fed or pressure tank fed. The meter and control panel are on a common floor stand or portable cart and supplied with Snuf-Bak or No-Drip dispense valves.

SEE-FLO^® 690

When a meter mix dispense application calls for applying precise beads or shots of difficult to handle abrasive or high viscosity materials, the SEE-FLO 690 is the machine of choice.

Features include carbide valving and hardened piston rods that never touch (scrub) the cylinder walls. It is powered by an AirDraulic cylinder for precise flow control throughout the dispense cycle.

Low cost, disposable NO-FLUSH mixer nozzles and SNUF-BAK dispense valves can be remote mounted over a conveyor for fully automated operations. "Hard Stop" shot size adjustments are simple and dependable.

SEE-FLO^® 387

Rugged and simple to operate, this machine is a bench top, air powered meter mix dispense system for applying precise measured 'shots' of two component low viscosity materials.

The SEE-FLO^® 387 is ideal for production potting, encapsulating, bonding, or lab type applications.

The AirDraulic™ drive delivers a smooth, pulse free mixed material flow rate.

The volumetric shot size is controlled by the stroke length of the positive displacement metering pistons.

Its mechanical hard-stop ensures extremely accurate shot size repeatability.

SERVO-FLO^® 801 SERVO DRIVE
SERVO-FLO^® 801-HV SERVO DRIVE

The Servo-Flo^® 801 and 801-HV meters use a Servo-Motor to accurately dispense small micro-shots of 2-component materials. This compact design incorporates the positive displacement metering and static mixing into one assembly for mounting at the point of application. The mix-dispense valve may be meter or remote mounted.

The lightweight meter construction, carbide valves and remote PLC control is ideal for robotic and XYZ motion dispensing systems.

Servo-Flo 801 range is 0.02cc-7.2cc at 1:1ratio.
Servo-Flo 801-HV range is 0.02-18cc at 1:1 ratio.

SEE-FLO^® 202 AIR-DRAULIC DRIVE

The See-Flo^® 202 uses and Air-Draulic™ (Air-Oil) drive to apply small micro-shots (0.02 cc and larger) of 2-component materials. This compact design incorporates the positive displacement metering and static mixing into one assembly for mounting at the point of application.

The lightweight meter construction, carbide valves and remote PLC control is ideal for manual and semi-automatic applications.

SEE-FLO^® 391 - PNEUMATIC DRIVE

The See-Flo 391^® uses all-pneumatic drive to apply small micro-shots (0.02 cc and larger) of 2-component materials. This compact design incorporates the positive displacement metering and static mixing into one assembly for mounting at the point of application.

The lightweight meter construction, carbide valves and remote PLC control is ideal for manual and semi-automatic dispensing systems.

Adjustable ratio, two component meter mix dispense system. Recommended for dispensing low to medium viscosity materials.

Double acting metering cylinders allow continuous, on demand flow or metered 'volumetric shots' of mixed materials with no reload delay between parts.

Many industrial products are processed with this production proven machine. Air powered positive displacement meter pumps with ‘hard stop’ shot controls and disposable mixers has given the SEE-FLO 7 a legendary reputation for durability and versatility in a broad range of applications including potting, encapsulating, and casting.

Either floor or cart mounted, the system is available with a broad selection of controls and material supply options.

These models are designed to dispense 2-component materials for resin transfer, vacuum molding and closed-molding processes for fiber- reinforced plastic. Systems are also designed for Liquid Silicone Rubber (L.S.R.) and Liquid Injection Molding (L.I.M.) materials. These adjustable ratio continuous flow systems are economical for high-end production applications. Options are available for volume control and various dispensing styles having different volume requirements. Snuf-Bak or No-Drip dispense valves and low cost, No-Flush disposable mixer nozzles are available for automatic or manual dispensing operations.

SEE-FLO^® 582

This air powered, positive displacement, double acting meter mix dispense system is well suited for dispensing metered ‘shots’ or operator controlled quantities of low to medium viscosity material through a NO-FLUSH disposable static mixer.

Floor, cart, or pail top mounted, the SEE-FLO 582 is modular and adapted to a wide range of production applications.

SEE-FLO 582 - HV

Similar to the standard system, the SEE-FLO 582-HV is configured for dispensing high viscosity adhesives, sealants, and molding materials.

The Servo-Flo 704 meter mix dispense system is totally enclosed and designed for automated production with controls interface requirements.

The Servo-Flo 704 is a Servo-motor driven 2-component gear pump metering system ideal for high precision applications for precisely controlling the output volume and mix ratio of the material.

This unit can be tank fed or pump fed and is capable of dispensing precise shot volumes or precision bead profiles.

The dispense rate can be varied throughout the dispensing process to provide varying bead sizes or variable flow. Ideal for low to medium viscosity materials.

SERVO-FLO^® 704 HV - DUAL SERVO GEAR
- HIGH VOLUME VARIABLE RATIO METERING

The Servo-Flo 704 HV meter mix dispense system is designed for High Volume automated production with operator controls.

The Servo-Flo 704 HV is a Servo-motor driven 2-component gear pump metering system ideal for high precision applications for precisely controlling the output volume and mix ratio of the material.

This unit is pump fed and is capable of dispensing precise shot volumes or precision bead profiles.

The dispense rate can be varied throughout the dispensing process to provide varying bead sizes or variable flow. Ideal for low to medium viscosity materials.

PROGRAM-A-BEAD^® 995 - GEAR METER

Ideal for high precision, silicone formed-in-place (FIP) gasket applications.

One-part and two-part Program-A-Bead meter mix dispense systems are adjustable ratio, precision gear pump metering machines for precisely controlling the output volume and desired mix ratios of adhesive and sealant materials.

These servo motor driven gear pumps are specifically designed for precise metering of medium to high viscosity fluids.

SEE-FLO^® 990-B and 990-G- GEAR METER

The See-Flo 990 continuous flow 2-component meter mix dispense systems are well suited for applying low to medium viscosity resins for structural bonding or similar applications.

With this continuous flow design there is no reload cycle which allows lengthy beads and fast production rates.

Series 990-B is a belt-drive model and series 990-G is a gear-drive model.

SEE-FLO^® 1100

This fixed-ratio meter mix dispense system ensures that the  2-Component material is metered on ratio to the specified ratio then mixed and dispensed properly onto the product.  The See-Flo 1100 is designed to dispense high viscosity 2-Component sealing and structural bonding materials with narrow to wide ratio formulas.

The floor mounted system typically includes 55 and/or 5 gallon pumps. System controls are available without material heating or with material heating (shown).

The dispensing portion utilizes an automatic 2-component No-Drip or Snuf-Bak dispense valve with an available manual handle and trigger assembly. No-Flush disposable mixers are provided and sized to the application.