PLYMOUTH, MI -- The new 2200-245-125 Manual Tip-Seal® Kiss dispense valve is ideal for dispensing low- to high-viscosity 1-component adhesive and sealant materials such as silicone or polyurethane materials. The manual valve used in repetitive fluid dispensing applications where operators dispense short segments or long beads of material in adhesive bonding or sealing applications.
The valve’s pistol grip assembly has an electric trigger with a rugged trigger guard and foam grip for added operator comfort. When the trigger is depressed the dispense controller starts the dispense cycle by opening the valve. The controller can be set to have the operator close the valve for visual dispensing or to automatically close the Tip-Seal valve for a precision metered volume of material.
The unique Tip-Seal design is ideal for dispensing solvent-based, moisture-curing and stringy materials such as silicones or polyurethanes. The valve opens and closes its material passage at the tip of the nozzle to precisely start and stop material flow. Sealing at the tip also prevents material from hardening in the nozzle, oozing or dripping.
The Tip-Seal valve has a carbide tip, titanium-coated shaft, hardened seat and wear-resistant fluid seals to extend valve life. Material is delivered to the Tip-Seal valve by either a metering assembly or under regulated pressure from supply tanks or pumps available from Sealant Equipment & Engineering, Inc.
Sealant Equipment
& Engineering, Inc. is a leading
manufacturer of precision fluid dispense
systems and valves, is ISO 9001:2000
registered and designs, manufactures and
integrates production-engineered dispensing
systems to robotically, automatically and
manually apply one- and two-component
adhesives, sealants and lubricants for
product assembly manufacturers
worldwide.
Machine Systems Contact:
Nick
Schultz, phone (734) 459-8600 x106
Dispense Valves Contact:
Mark
Ruhlmann, phone (734) 459-8600 x111
Sealant
Equipment & Engineering is registered
to ISO 9001:2000 Quality Management System
for all Manufactured
Equipment
"When it comes to solving liquid dispensing problems, you won't find a
better resource than Sealant Equipment and Engineering."
