2200-087 New Valve Controls Fluid Flow for a Variety of Components in Fluid Delivery, Metering and Dispensing Systems


PLYMOUTH, MI -- Sealant Equipment & Engineering, Inc.’s new 2200-087 Series Fluid Control Valve is designed to start or stop the flow of pressure-fed materials quickly and effectively. With its No-Drip® carbide ball-end needle and hardened seat, the Fluid Control Valve is designed to handle low- to high-viscosity and abrasive materials such as adhesives, sealants and lubricants. It controls the flow of fluid materials and chemicals in both material-delivery and fluid-dispensing systems.


The 2200-087 Series all-pneumatic, double-acting valve is ideal for both pump and meter-system inlet and outlet fluid-flow management. The valve has 3/4”-NPT inlet and outlet ports and is rated for 4,000 PSI. It can be used with a fluid regulator to stop bypass flow and to maintain down-stream pressure after closing.


The Fluid Control Valve also is used as a high-viscosity or high-flow dispense valve in automated, repetitive or high-speed dispensing applications, such as fixtured automation or robot-tool-mounted dispensing. It may be mounted to fixed or movable tooling or brackets and activated by automation, hand or footswitch actuator.


Sealant’s 2200-087 Series Flow Control Valve features hardened internal components and wear-resistant seals. It is available in stainless steel for dispensing highly corrosive materials.
Detailed information about the valve is available at
www.sealantequipment.com/dispensevalves-1part.htm#2200-087
 

Sealant Equipment and Engineering is the leading manufacturer of precision meter-mix dispense systems and fluid-dispense valves. The company designs, manufactures and integrates precision-engineered dispensing systems, equipment and dispense valves to supply, proportion, control, meter, mix and dispense a wide variety of one-, two- and three-component adhesives, sealants, lubricants including epoxies, silicones, polyurethanes, plastisols, acrylics, greases, oils and other fluid materials.

We work with you directly and select the correct Precision Dispense System components and Dispense Valve for your 1-Component and 2-Component fluid dispensing application.  Dispense Valves are available separately to upgrade your current system. We offer basic air operated manual dispensing systems up through robotic applied dispensing systems with touch screen operator interface control. We also integrate and pre-program your dispensing system on our floor with XYZ automation or robotic process equipment.

 

Let us review your requirements and send you a quote for a high-quality and reliable dispensing valve or system engineered, manufactured and installed by our highly trained personnel.   Your new dispensing system will be assembled to meet your exact application requirements.

 

Machine Systems Contact:

Nick Schultz, phone (734) 459-8600 x106

Dispense Valves Contact:

Mark Ruhlmann, phone (734) 459-8600 x111

 

Sealant Equipment & Engineering is registered to ISO 9001:2000 Quality Management System for all Manufactured Equipment

 

We offer a two-year warranty - Double the Industry Standard!

When it comes to solving liquid dispensing problems, you won't find a better resource than Sealant Equipment and Engineering, inc.

 

  HomehDispense EquipmenthEquipment QuotehDispense ValveshValve QuotehRequest ServicehMap & DirectionshSite MaphE-Mail Us

Sealant Equipment - Plymouth, MI 734-459-8600Copyright © 2000-2012 Sealant Equipment & Engineering, Inc.  All Rights Reserved.  Policies, Terms and Trademarks