2200-245-125 Tip-Seal® material-dispense valve delivers precise beads, exact shots

 

New Model 2200-245-125 Tip-Seal® dispense valve is designed for precision dispensing of low- to high-viscosity flowable materials. It is also used in high-speed stitching or repetitive on-off applications where short segments of material are deposited onto a surface.

 

The unique Tip-Seal design is ideal for dispensing solvent-based, moisture-curing and stringy materials such as silicones or polyurethanes. The valve opens and closes its material passage at the tip of the nozzle to precisely start and stop material flow. Sealing at the tip also prevents material from hardening in the nozzle, oozing or dripping.

 

Pneumatically actuated, the Tip-Seal valve has a carbide tip, titanium-coated shaft, hardened seat and wear-resistant fluid seals to extend valve life. The stroke adjuster can set the needle opening to change material-flow rates and bead-profile sizes.

 

The valve’s precision dowel and screw holes allow easy and accurate mounting. The 2.5” tip length (63.5mm) enables the valve to reach into parts and fixturing. Other tip lengths are available. Material is delivered to the Tip-Seal valve by either a metering assembly or under regulated pressure from supply tanks or pumps available from Sealant Equipment and Engineering, Inc.

2200-245-125 Tip-Seal
 

Sealant Equipment and Engineering is the leading manufacturer of precision meter-mix dispense systems and fluid-dispense valves. The company designs, manufactures and integrates precision-engineered dispensing systems, equipment and dispense valves to supply, proportion, control, meter, mix and dispense a wide variety of one-, two- and three-component adhesives, sealants, lubricants including epoxies, silicones, polyurethanes, plastisols, acrylics, greases, oils and other fluid materials.

We work with you directly and select the correct Precision Dispense System components and Dispense Valve for your 1-Component and 2-Component fluid dispensing application.  Dispense Valves are available separately to upgrade your current system. We offer basic air operated manual dispensing systems up through robotic applied dispensing systems with touch screen operator interface control. We also integrate and pre-program your dispensing system on our floor with XYZ automation or robotic process equipment.

 

Let us review your requirements and send you a quote for a high-quality and reliable dispensing valve or system engineered, manufactured and installed by our highly trained personnel.   Your new dispensing system will be assembled to meet your exact application requirements.

 

Machine Systems Contact:

Nick Schultz, phone (734) 459-8600 x106

Dispense Valves Contact:

Mark Ruhlmann, phone (734) 459-8600 x111

 

Sealant Equipment & Engineering is registered to ISO 9001:2000 Quality Management System for all Manufactured Equipment

 

We offer a two-year warranty - Double the Industry Standard!

When it comes to solving liquid dispensing problems, you won't find a better resource than Sealant Equipment and Engineering, inc.

 

  HomehDispense EquipmenthEquipment QuotehDispense ValveshValve QuotehRequest ServicehMap & DirectionshSite MaphE-Mail Us

Sealant Equipment - Plymouth, MI 734-459-8600
Copyright © 2000-2010 Sealant Equipment & Engineering, Inc.  All Rights Reserved.  Policies, Terms and Trademarks