2200-555 Micro-Kiss No-Drip^® DISPENSE VALVE

• Miniature, lightweight design, Small precise extruded beads

• Integrated flow rate adjustment and lock

• Double-acting Divorced air/material design

• Double-acting with Fail-safe spring closure

• Long-life Carbide Ball Needle and Seat

• Multiple Valve manifolds available

Typical Applications

• Dispensing sealants, adhesives and lubricants

• Fixtured, Automated and High Speed repetitive dispensing

• Fast and clean material shut-off for high production rates

• Timed shots and filling operations

• Manually adjusted flow rate control

• High speed stitching or air dry materials

2200-590 Micro-Kiss No-Drip^®DISPENSE VALVE

• Multiple Valve Manifold

• Up to 5 Valves per Manifold

• Miniature, lightweight valve design

• Integrated flow rate adjustment and lock

• Long-life Carbide Ball Needle and Seat

Typical Applications

• Multiple measured volumes applied simultaneously

• Dispensing sealants, adhesives and lubricants

• Fixtured, Automated and High Speed repetitive dispensing

• Fast and clean material shut-off for high production rates

• Timed shots and filling operations

• Manually adjusted flow rate control

• Small, precise extruded beads

2200-245 Kiss No-Drip^® DISPENSE VALVE

• Compact and lightweight design

• Screw and dowel pin accuracy mounting

• Double-acting with Fail-safe spring closure

• Long-life Carbide Ball Needle and Seat

• Extrude, stream and ribbon beads

• Dispense abrasive materials

Typical Applications

• Dispense sealants, adhesives and lubricants

• Airless spray viscous materials

• Air Assisted Airless spray fluids

• Anti-Flutter Mastic material

• PVC Seam sealing

2200-245 Kiss^® AIRLESS SPRAY VALVE

• Compact and lightweight design

• Screw and dowel pin accuracy mounting

• Double-acting with Fail-safe spring closure

• Long-life Carbide Ball Needle and Seat

• Aluminum body, steel nose-piece

• Dispense abrasive materials

Typical Applications

• Airless spray viscous materials

• Spray sealants, adhesives and lubricants

2100-480 No-Drip^® DISPENSE VALVE

• Stroke adjustment for fine flow rate control

• Air-to-open; Spring to close air cylinder

• Divorced air/material design

• Adjustable Teflon packing standard

• Long-life Carbide Ball Needle and Seat

• Mounting hole for 3/8" diameter rod

Typical Applications

• Dispense sealants, adhesives and lubricants

• PVC, silicones, greases

• Low viscosity and pourable materials

• Dispense abrasive materials

• Extrude beads

• Automation or Manual applications

2100-911 No-Drip^® DISPENSE VALVE

• Double-acting Divorced air/material design

• Wear resistant Elastoplastic seal

• Long-life Carbide Ball Needle and Seat

• Square body for robot or bracket mounting

• Mounting hole for 3/8" diameter rod

• 1/4" NPT inlet/outlet material ports

Typical Applications

• Dispense sealants, adhesives and lubricants

• Low viscosity and pourable materials

• Dispense abrasive materials

• Dispense extruded beads

• Automatic, robotic and manual applications

• Gun dispensed automation input signal requirements

2200-044 No-Drip^® DISPENSE VALVE

• Flow rate stroke adjustment; Fail-safe spring closure

• 1-piece Double-acting Divorced air/material design

• Wear resistant Elastoplastic seal

• Long-life Carbide Ball Needle and Seat

• Square body for robot or bracket mounting

• Mounting hole for 3/8" diameter rod

Typical Applications

• Dispense sealants, adhesives and lubricants

• Low viscosity and pourable materials

• Dispense abrasive materials

• Extrude beads

• Automatic, robotic and manual applications

• Gun dispensed automation input signal requirements

• Compact and lightweight design

• Zero-cavity shut-off sealing at the tip

• Tip-Seal shut-off reduces stringing

• Screw and dowel pin accuracy mounting

• Double-acting with Fail-safe spring closure

• 0.32" nozzle length

• Orifice 0.125"

Available Options

• 300 Series SST Seat Housing for water-based materials
• Flush mount manifold port
• w/o stroke adjustment
• Extended valve cap & no spring

• Compact and lightweight design

• Zero-cavity shut-off sealing at the tip

• Tip-Seal shut-off reduces stringing

• Screw and dowel pin accuracy mounting

• Double-acting with Fail-safe spring closure

• 2.5" nozzle length

• Orifice 0.060"

Available Options

• 300 Series SST Seat Housing for water-based materials

• Compact and lightweight design

• Zero-cavity shut-off sealing at the tip

• Tip-Seal shut-off reduces stringing

• Screw and dowel pin accuracy mounting

• Double-acting with Fail-safe spring closure

• 3.29" nozzle length

• Orifice 0.180"

Available Options

• without stroke adjustment

2200-1051 Tip-Seal^® DISPENSE VALVE

• 1/4" NPT inlet/outlet material ports

• Double-acting Divorced air/material design

• Wear resistant Elastoplastic seal

• Square body for robot or bracket mounting

• Mounting hole for 3/8" diameter rod

• 1-pc Aluminum body with carbon steel parts

Typical Applications

• Medium to high flow rates

• Medium to high viscosity abrasive materials

• Extruded, stitched or mastic drop beads

• Automatic and robotic applications

• Gun dispensed automation input signal requirements

• Sealants, adhesives and lubricants

2600-001 Tip-Seal^® DISPENSE VALVE

• Zero-cavity shut-off sealing at the tip

• (2) 3/8" NPT material inlet ports

• Select from (2) Orifice sizes; 3" and 7" nozzle lengths

• Double-acting Divorced air/material design

• Wear resistant ‘Polypak’ seal; Hardened Needle/Seat

• Slotted body for bracket mounting; hole for 3/8" dia. rod

Typical Applications

• Dispensing Sealants, Adhesives, Mastics

• Medium to high viscosity materials

• High flow rate robotic applications

• Dispense abrasive materials

• Automatic/robotic applications; beads, stitching

• Gun dispensed automation input signal requirements

2600-035 HIGH VOLUME Tip-Seal^® DISPENSE VALVE

• Available orifices: 0.190" (-001) and 0.350" (-002)

• (2) 3/4" NPT material inlet ports

• (2) 3/8" NPT material inlet ports

• (2) 1/4" NPT air cylinder open/close ports

• Double-acting and Divorced air/material body design

• Wear resistant ‘Polypak’ seal; Hardened Needle/Seat

• Dual body slots for quick mount EOA bracket mounting

• Dual dowel pin and dual screw mounting

Typical Applications

• Dispensing Sealants, Adhesives, Mastics

• High viscosity materials

• High flow rate robotic applications

• Dispense abrasive materials

• Automatic/robotic applications; beads, stitching

2200-806 HIGH-VOLUME HEATED Tip-Seal^® VALVE

• Configured for Heated Abrasive Materials

• 1" NPT Material Inlet Port

• 3/4" Diameter Material Outlet Orifice

• Material Chamber has 120v Heater Cartridges and Sensor

• Separate Nozzle Heater prevents cold material starts

• Includes wear-resistant internal components and high temperature seals

Typical Applications

• Dispensing Lighting Ballast Pitch

• Large volume, slow pour potting

• Eliminating Splashing in Pouring Operations

• Laminating Roller Fill Applications

• High-Volume packaging applications

• Fast, crisp immediate shut-offs

MANUAL VALVE HANDLES AND ASSEMBLIES

• Lightweight Construction For Greater Comfort
• Vertical and Pistol Grip Handle Assemblies
• Light Touch - Pneumatic and Electric Trigger Actuators
• Trigger Guards On Electric Handles

Typical Applications

• One-part Acrylics

• One-part Epoxies

• One-part Silicones

• One-part Urethanes

• PVC Plastisol

• Oils And Lubricants

• Greases

• Rubber Based Mastics

• Polyols And Resins

2200-1021 MANUAL PISTOL GRIP GUN

• 1/2" NPT inlet and 1/4" NPT Outlet

• 6000 PSI Maximum Inlet Pressure

• Carbide Ball and Seat

• Stainless Steel Fluid Body

• Ergonomic Pistol Grip Handle

• Order Nozzle separately

Typical Applications

• Low to High Volume flow rates

• Low to High Viscosity materials

• Adhesives and Sealants

• Epoxies, Urethanes and Silicones

• Lubricants and greases

2600-003 METERING VALVE

• Volumetrically Meters Small Precise Shot Sizes

• Dispense from 0.2 cc up to 2.0 cc per shot

• Manual Pre-set of Shot Size Adjustment

• Double-Acting Divorced Air/Material Design

• Resistant 'PolyPak' Seal

• Improved Volume Accuracy Over Timed Shot Dispensing

• NPT Material Inlet/Outlet Ports

• Slotted Body for Bracket Mounting; Hole for 3/8" dia. rod

Typical Applications

• Dispensing Lubricants, Sealants and Adhesives

• Manual Dispensing with Fixed or Movable Arm

• XYZ Automated Dispensing Applications

• Fixtured Automation or Robot Tool Mounted Dispensing

• Automated and High Speed Repetitive Dispensing