Home
Meter-Mix Dispense Systems

Sealant Equipment & Engineering manufactures adhesive dispense systems for 2-part materials requiring meter mix and dispense equipment. The precision metering equipment shown here is part of a complete two-part adhesive dispensing system for epoxy dispensing, silicone dispensing, urethane dispensing, acrylic dispensing, polyester dispensing, manual dispensing and robotic dispensing applications.

Call 734-459-8600 or Click on Request for Quote to get started.

Shot Meter Systems:

Servo-Flo 105 Servo-Flo 488 Servo-Flo 605
Servo-Flo 302 See-Flo 488 See-Flo 690
See-Flo 387 See-Flo 494 P-A-B 692
  Servo-Flo 505  

Micro-Meter Systems:

Angstrom Meter
Multi-Cartridge Servo Dispenser
See-Flo 202
See-Flo 391
Servo-Flo 801
Servo-Flo 801-HV

Continuous Flow Meter Systems:

See-Flo 7
Servo-Flo 704
See-Flo 582
 

Shot Meter Systems - Positive Displacement Meters

   
Servo-Flo 105

SERVO-FLO 105
VARIABLE RATIO, DUAL SERVO DRIVE

SERVO-FLO 105-HV
HIGH VOLUME, DUAL SERVO DRIVE

This variable-ratio, positive rod displacement, meter-mix dispense system has dual independent-drive servo motors to accurately meter materials on ratio. Ratio is adjusted in the operator interface.

The system dispenses precision volumetric shots or bead profiles. The flow rate can be varied on-ratio during the dispense cycle to accommodate different shot flows, bead diameters and tip speeds.

The meter accepts low to high viscosity materials and can be supply pump fed or pressure tank fed. The meter and control panel are individually floor stand mounted or on a common portable cart.

 
Request for Quote
 
PDF: SF 105 Floor Mount
 
PDF: SF 105-HV System
 
PDF: SF 105 Robot Mount
 
PDF: Technical Bulletin
 
Video: Servo-Flo 105

 
Servo-Flo 605

SERVO-FLO 605
VARIABLE RATIO, DUAL SERVO DRIVE

This variable-ratio, positive rod displacement, 2-Component meter-mix dispense system uses dual independent-drive servo motors to accurately meter materials on ratio. The meter, control panel and operator interface are enclosed. The ratio is adjusted in the operator interface control panel.

The system dispenses shots or beads and the dispense speed can be varied throughout the dispense cycle to provide a variable flow rate. The meter system is designed for low to high viscosity materials, can be fed by pump or tanks and dispenses precision shot volumes or bead profiles.

 
Request for Quote
 
PDF: Servo-Flo 605

 
Servo-Flo 302

SERVO-FLO 302
FIXED RATIO, SERVO DRIVE

Totally enclosed and designed for automated production, the SERVO-FLO 302 is a Servo-motor powered fixed ratio, positive rod displacement 2-part meter mix dispense system.

This unit can be tank fed or pump fed and is capable of dispensing precise volumes or precision bead profiles.

The dispense rate can be varied throughout the dispensing process to provide varying bead sizes or variable flow. Ideal for low to medium viscosity materials.

 
Request for Quote
 
PDF: Servo-Flo 302

 
Servo-Flo 505

SERVO-FLO 505
FIXED RATIO, SERVO DRIVE

Meter mix dispense and robotically apply uniform beads of two component structural bonding materials directly to metal and plastic automotive panels (i.e. doors, hoods, decks).

A servo motor with internal reduction drive and positive displacement pistons are interfaced with the robot controller to dispense the specific bead diameter throughout the adhesive pattern.

A light weight SNUF-BAK two component dispense valve with disposable NO-FLUSH static mixer nozzle blends the materials at the point of application.

 
Request for Quote
 
PDF: Servo-Flo 505
 
Video: Servo-Flo 505

 
Program-A-Bead 692

PROGRAM-A-BEAD 692
FIXED RATIO, SERVO DRIVE

Meter mix dispense and robotically apply uniform beads of two component structural bonding materials directly to metal and plastic automotive panels (i.e. doors, hoods, decks).

A servo motor drive with external reduction and positive displacement pistons are interfaced with the robot controller to dispense the specific bead diameter throughout the adhesive pattern.

A light weight SNUF-BAK two component dispense valve with disposable NO-FLUSH static mixer nozzle blends the materials at the point of application.

 
Request for Quote
 
PDF: P-A-B 692
 
Video: P-A-B 692

 
Proven Meter Mix Dispense System

SEE-FLO 494
FIXED RATIO, AIR-OIL DRIVE

This production proven meter mix dispense system is well suited for applying uniform beads of two component structural bonding adhesives.

AirDraulic driven (air over oil) positive displacement metering rods meter the adhesive in exact proportions and dispense at a preset constant flow rate. Meter systems are either floor or cart mounted.

See-Flo 494 can be supply pump fed or pressure tank fed. The meter and control panel are on a common floor stand or portable cart.

 
Request for Quote
 
PDF: SF 494 Floor Mount
 
PDF: SF 494 Cart Mount

 
Positive Rod Displacement Meter-Mix System

SERVO-FLO 488
FIXED RATIO, SERVO DRIVE

Servo-Flo 488 has a volume capacity of 1,359 cu. cm. at a 1:1 ratio. This positive rod displacement meter-mix dispense system applies a precise bead or shot of medium to high viscosity materials.  The Servo Motor drive provides precise flow rates and dispense volumes and is either floor or cart mounted.

The meter can be supply pump fed or pressure tank fed. The meter and control panel are on a common floor stand or portable cart and supplied with Snuf-Bak or No-Drip dispense valves.

 
Request for Quote
 
PDF: Servo-Flo 488

 
Positive Rod Displacement Meter-Mix System

SEE-FLO 488
FIXED RATIO, AIR-OIL DRIVE

This positive rod displacement meter-mix dispense system applies a precise bead or shot of medium to high viscosity materials. The AirDraulic™ air-over-oil drive provides consistent flow rates and is either floor or cart mounted.

See-Flo 488 has a volume capacity of 1,359 cu. cm. at a 1:1 ratio. The meter can be supply pump fed or pressure tank fed. The meter and control panel are on a common floor stand or portable cart and supplied with Snuf-Bak or No-Drip dispense valves.

 
Request for Quote
 
PDF: See-Flo 488

 
See-Flo 690

SEE-FLO 690
FIXED RATIO, AIR-OIL OR PNEUMATIC DRIVE

When a meter mix dispense application calls for applying precise beads or shots of difficult to handle abrasive or high viscosity materials, the SEE-FLO 690 is the machine of choice.

Features include carbide valving and hardened piston rods that never touch (scrub) the cylinder walls. It is powered by a pneumatic or AirDraulic cylinder for precise shot or flow control throughout the dispense cycle.

Low cost, disposable NO-FLUSH mixer nozzles and SNUF-BAK dispense valves can be remote mounted for automated operations. May be pump or tank fed.

 
Request for Quote
 
PDF: See-Flo 690
 
Video: See-Flo 690

 
See-Flo 387

SEE-FLO 387
FIXED RATIO, AIR-OIL DRIVE

Rugged and simple to operate, this machine is a bench top, air powered meter mix dispense system for applying precise measured 'shots' of two component low viscosity materials.

The SEE-FLO 387 is ideal for production potting, encapsulating, bonding, or lab type applications.

The AirDraulic™ drive delivers a smooth, pulse free mixed material flow rate.

The volumetric shot size is controlled by the stroke length of the positive displacement metering pistons.

Its mechanical hard-stop ensures extremely accurate shot size repeatability.

 
Request for Quote
 
PDF: SF 387 Brochure
 
PDF: SF 387 DataSheet
   

Micro-Meter® Systems - Positive Displacement Shot Meters

   

Angstrom Meter CF

Angstrom Meter PF

ANGSTROM CF METER
FIXED RATIO, SERVO DRIVE

ANGSTROM PF METER
FIXED RATIO, SERVO DRIVE

The Angstrom meter provides Positive Rod Displacement metering for extremely small beads and dispense volumes. Positive Rod Displacement provides highest accuracy for on-ratio dispensing and consistent volume control.

Dispense volumes are in the range of 0.13 cc up to 1.26 cc at 1:1 Ratio. Bead sizes have been tested as small as 0.3 mm in diameter at 10:1 ratio.

The Angstrom CF Meter is designed to accept side-by-side cartridges to supply Part A and B materials under pressure to the meter.

The Angstrom PF Meter System is a Pressure Feed model with the material supplied by pressure tanks and supply pumps.

 
Request for Quote
 
PDF: Angstrom Meter
 
 
   
Multi-Cartridge Servo Dispenser

MULTI-CARTRIDGE SERVO DISPENSER
FIXED RATIO, POSITIVE ROD DISPLACEMENT

Ideal for robotic dispensing of pre-mix 6 oz. and 12 oz. polyethylene cartridges. Articulating cartridge holder opens to load and unload both cartridges to supply material to the dispenser assembly while the integrated dispense valve eliminates dispense hoses and increases accuracy of bead and volume control.

 
Request for Quote
 
PDF: Multi-Cartridge Servo Dispenser

 
Servo-Flo 801

SERVO-FLO 801
FIXED RATIO, SERVO DRIVE

SERVO-FLO 801-HV
FIXED RATIO, SERVO DRIVE

The Servo-Flo 801 and 801-HV meters use a Servo-Motor to accurately dispense small micro-shots of 2-component materials. This compact design incorporates the positive displacement metering and static mixing into one assembly for mounting at the point of application. The mix-dispense valve may be meter or remote mounted.

The lightweight meter construction, carbide valves and remote PLC control is ideal for robotic and XYZ motion dispensing systems.

 
Request for Quote
 
PDF: Servo-Flo 801
 
PDF: Servo-Flo 801 HV
 
Video: Servo-Flo 801

 
See-Flo 202

SEE-FLO 202
FIXED RATIO, AIR-OIL DRIVE

The See-Flo 202 uses an Air-Draulic™ (Air-Oil) drive to apply small micro-shots of 2-component materials. This compact design incorporates the positive displacement metering and static mixing into one assembly for mounting at the point of application.

The lightweight meter construction, carbide valves and remote PLC control is ideal for manual and semi-automatic applications.

 
Request for Quote
 
PDF: SF 202 Bench Mount
 
PDF: SF 202 Cart Mount

 
See-Flo 391

SEE-FLO 391
FIXED RATIO, PNEUMATIC DRIVE

The See-Flo 391 uses an all-pneumatic drive to apply small micro-shots of 2-component materials. This compact design incorporates the positive displacement metering and static mixing into one assembly for mounting at the point of application.

The lightweight meter construction, carbide valves and remote PLC control is ideal for manual and semi-automatic dispensing systems.

 
Request for Quote
 
PDF: See-Flo 391
   

Continuous Flow Meter Systems

   
See-Flo 7

SEE-FLO 7
VARIABLE RATIO, PNEUMATIC DRIVE

Adjustable ratio, two component meter mix dispense system. Recommended for dispensing low to medium viscosity materials.

Double acting metering cylinders allow continuous, on demand flow or metered 'volumetric shots' of mixed materials with no reload delay between parts.

Many industrial products are processed with this production proven machine. Air powered positive displacement meter pumps with ‘hard stop’ shot controls and disposable mixers has given the SEE-FLO 7 a legendary reputation for durability and versatility in a broad range of applications including potting, encapsulating, and casting.

 
Request for Quote
 
PDF: See-Flo 7
 
Video: See-Flo 7

 
See-Flo 582

SEE-FLO 582
FIXED RATIO, PNEUMATIC DRIVE

This air powered, positive displacement, double acting meter mix dispense system is well suited for dispensing metered ‘shots’ or operator controlled quantities of low to medium viscosity material through a NO-FLUSH disposable static mixer.

Floor, cart, or pail top mounted, the SEE-FLO 582 is modular and adapted to a wide range of production applications.

SEE-FLO 582 - HV

Similar to the standard system, the SEE-FLO 582-HV is configured for dispensing high viscosity adhesives, sealants, and molding materials.

 
Request for Quote
 
PDF: See-Flo 582

 
Servo-Flo 704

SERVO-FLO 704
VARIABLE RATIO, DUAL SERVO

The Servo-Flo 704 meter mix dispense gear meter system is totally enclosed and designed for automated production with controls interface requirements.

The Servo-Flo 704 is a Servo-motor driven 2-component gear pump metering system ideal for high precision applications for precisely controlling the output volume and mix ratio of the material.

This unit can be tank fed or pump fed and is capable of dispensing precise shot volumes or precision bead profiles.

The dispense rate can be varied throughout the dispensing process to provide varying bead sizes or variable flow. Ideal for low to medium viscosity materials.

 
Request for Quote
 
PDF: Servo-Flo 704
 
Video: Servo-Flo 704
 
 
Servo-Flo 704 HV
Servo-Flo 704 PGM

SERVO-FLO 704-HV
HIGH VOLUME, PLATE MOUNTED

Servo-Flo 704 Series meters are independent servo-drive gear pump metering systems ideal for high precision applications for precisely controlling the output volume and mix ratio of a
2-component material. Each meter is pump fed and is capable of dispensing precise shot volumes or precision bead profiles of low to high viscosity materials.

The Servo-Flo 704-HV high volume gear meter-mix dispense system is designed for High Volume automated production and includes an operator interface control panel.

 
Request for Quote
 
PDF: Servo-Flo 704 HV
 
 
Phone (734) 459-8600     Fax (734) 459-8686     45677 Helm St.    PO Box 701460     Plymouth, MI     48170     USA

Home · Dispense Equipment · Equipment Quote · Dispense Valves · Valve Quote · Request Service · Map & Directions · Site Map · E-Mail Us
© Nordson SEALANT EQUIPMENT   All Rights Reserved
Policies, Terms and Trademarks